Samsung Galaxy A13 A135 is one of Samsung's popular smartphone lines with an affordable price, stylish design and many attractive features. However, like any electronic product, it can also encounter technical problems, and a common problem is "Dead Short" or short circuit on the Samsung Galaxy A13 A135.
Dead Short is a state where the phone does not boot or function properly due to a short circuit in its electrical system. The main cause of short circuits can be component failure, software damage, or water and other damage.
To fix this problem, you need to perform careful inspection and repair steps. Below are some commonly applied solutions to fix short circuits on Samsung Galaxy A13 A135:
Check the battery: Make sure the phone's battery has enough power to start. Charge your battery for a short time and check if the phone reacts or not.
Restart: Try restarting the phone by pressing and holding the power button for at least 10 seconds. If there is no response, try combining the power button and volume down button.
Check components: Check if components such as screen, battery, power button, and other important components have problems. Replace or repair damaged components.
Check the software: If it's not due to components, you may need to restore factory settings or reload the firmware to fix software errors.
Check for water: If your phone has been exposed to water or is damaged by water, you will need to perform a drying procedure and check the main board for damage.
Consult a professional: If you cannot fix the problem yourself, seek help from a service center or a professional technician.
Note that fixing Dead Short on Samsung Galaxy A13 A135 can be complicated and sometimes requires professional intervention. Make sure you have the necessary knowledge and skills or seek support from someone with experience if needed.
No comments. Chúc mừng bạn là người đầu tiên.